COMPLETE GARAGES (all sizes) TEMPORARILY UNAVAILABLE.
REPLACEMENT COVERS STILL AVAILABLE.
PROTECTIVE COVERS FOR MOTORBIKES AND SCOOTERS.
Manufactured in one size: Depending on your motorbike sizes the folding garage may cover more than one bike.
A strong metal framework manufactured in the UK with a tough fabric cover.
Sizing Information
IMPERIALThe Motorbike Folding Garages is suitable for all bikes. This has a frame footprint of 5 feet x 10 feet 3 inches. This requires a ground space of 5 feet 6 inches x 11 feet 8 inches. frame sketchClick on the thumbnail below to see the full size image. 
|
METRICThe motorbike Folding Garages is suitable for all bikes. This has a frame footprint of 1.52 metres x 3.15 metres. This requires a ground space of 1.68 metres x 3.55 metres. frame sketchClick on the thumbnail below to see the full size image. 
|
The additional ground space length is needed to allow the frame to lie flat when fully open.
Technical Information
THE FRAME
The framework of the Folding Garages is constructed from mild steel which has been totally galvanised.
The tubular part of the frame is constructed with 3/4" square mild steel tube 1/16" thick. Square tube provides a more rigid structure than round tube. The hinge assembly is made with 1/8" thick steel plate.
THE COVERING
The covering is a breathable polyester, 300D high strength, woven textile, with a pleasing olive green colour. Breathability is ensured by an, approximately, 2" gap all round between the hem of the cover and the frame. This gap promotes a good draft at ground level, ensuring the Folding Garage can deal with high humidity weather conditions.
.jpg)
